Additional Dialing Information; Setting Up Bluetooth Sim Access For Car Kit Phones - HTC Touch User Manual

3.5 Additional Dialing Information

Make an emergency call
•
Enter the international emergency number for your locale, and press
the TALK button on your device.
Tip
Additional emergency numbers may be included in your SIM card. Contact
your service provider for details.
Make an international call
1. Touch and hold (or tap and hold) the number 0 key on the Phone
keypad until the + sign appears. The + replaces the international
prefix of the country that you are calling.
2.
Enter the full phone number you want to dial, and press the TALK
button on your device. The full phone number includes country code,
area code (without the leading zero, if any) and phone number.
3.6 Setting Up Bluetooth SIM Access for
Car Kit Phones
Bluetooth car kits that support the SIM Access Profile (SAP) can connect to
your device and access its SIM card via Bluetooth. Once a SAP connection
has been established, you can download SIM contacts from your device to
the car kit phone. You can also use the car kit phone to answer and make
calls using your device's SIM card.
Note To enable downloading contacts onto the car kit, ensure that all contacts
on the device are stored in the SIM card and not in the device memory.
Configure the car kit to download contacts only from the SIM card.
1.
On your device, make sure that Bluetooth is turned on and set to
visible mode. For information about turning on Bluetooth and
enabling visible mode, see "Bluetooth modes" in Chapter 10.
2. Tap Start > Programs > SAPSettings.
3. On the BT Remote SIM Access screen, select the Remote SIM Access
check box then tap Done.
Using Phone Features 67