Operating Instructions - NewAir AH-600 Owner's Manual

OPERATING INSTRUCTIONS

Be sure to plug into a 120 V AC, 60 Hz outlet.
1. Turning unit ON/OFF
a. Press the
be on at the low output setting and the "LOW" indicator will light. At this
setting, the heater output is 750 W.
b. Press the
2. Select working MODE:
You can select the mode by rotating the mode knob.
a. (LOW) MODE: heater will work continuously and the output will be
750 W at all times.
b. (HIGH) MODE: heater will work continuously and the output will be
1500 W at all times.
c. Comfort Setting mode (64℉, 70℉, 75℉):
Rotate mode knob to your desired temperature. There are three distinct
settings: 64℉, 70℉ and 75℉. In this mode, the heater will automatically
select the output power to accommodate your temperature setting. When
the room air temperature reaches your desired temperature, the unit will
automatically lower the output power to maintain your space at the desired
temperature.
1. Room temp less than Setting temp, output power is 1500 W at all times.
2. Setting temp equal to Room temp less than Setting temp +2℉, output
power changes from 1500 W to 750 W
3. Setting temp + 2℉ equal to Room temp, heater will stop heating.
3. AUTO-OFF TIMER (
When the heater is in use, you can set the timer for turning off the unit. Press
the or
intervals. When the time runs out, the heater will turn off automatically.
button once and rotate the mode knob once: the heater will
button again to turn heater off.
and
button to set the timer between 0.5 and 7.5 hours in 0.5 hour
button)
6