Icom IC-T70A Instruction Manual page 86

13
OPTIONS
• CP-12L
cigarette lighter cable with noise filter
• CP-19R
cigarette lighter cable with dc
Allows you to operate the transceiver through a 12 V ciga-
rette lighter socket. You can also charge the attached bat-
tery pack (during stand-by only).
CP-19R: A built-in DC-DC converter provides an 11 V DC
output.
• CP-23L
cigarette lighter cable
Allows charging of the battery packs through a 12 V ciga-
rette lighter socket. (For BC-191/BC-193)
• OPC-254L
dc power cable
For operation and charging via an external power supply.
• OPC-515L
dc power cable
Allows charging of the battery packs using a 12 V DC
power source instead of the AC adapter. (For BC-191/
BC-192/BC-193)
• AD-92SMA
antenna connector adapter
Allows you to connect an external antenna with a BNC
connector.
• HM-131 -
speaker microphone
Combination speaker-microphone that provides convenient
operation while hanging the transceiver on your belt.
• HM-153
earphone
Ideal for hands-free operation: clip the HM-153 (with inte-
grated PTT switch) to your lapel or breast pocket.
79
-
dc converter
-
microphone
• HS-94/HS-95/HS-97
headset
+OPC-2006
plug adapter cable
HS-94 : Ear hook type
HS-95 : Neck & arm type
HS-97 : Throat microphone
OPC-2006 : Allows you to connect the HS-94/HS-95/HS-97
to the transceiver. After connecting, the VOX
function can be used.
• SP-27
tube earphone
Provides clear audio in noisy environments.
• OPC-474
cloning cable
For transceiver-to-transceiver cloning.
• OPC-478/OPC-478UC
cloning cable
Used for data cloning between transceiver and PC with
CS-T70 (cloning software).
• CS-T70
cloning software
Provides quick and easy programming of such settings as
memory channels and Set modes contents via your PC's
RS-232C terminal (using OPC-478), or USB port (OPC-
478UC). Either OPC-478 or OPC-478UC is required.
• LC-174
carrying case
Helps protect the transceiver from scratches, etc.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used with
equipment that is not manufactured or approved by Icom.