Table of Contents
Advertisement
Timer Function
GB
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,you must start again.
1
Switch the system on by pressing Standby/On (
2
Press Timer/Clock until
3
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by pressing
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
d Press PROGRAM/SET.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
5
Set the timer switch-off time.
a Set the hour by pressing
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
d Press PROGRAM/SET.
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
6
Press
and
PROGRAM/SET.
Result:The source to be selected is displayed.
7
Press
and
switches on.
If you select...
TAPE (cassette) ........................
TUNER (radio) ..........................
8
CD (compact disc) ....................... Load a compact disc.
Press PROGRAM/SET to confirm the timer.
9
Press Standby/On to set the system to standby mode.
Result:
is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can use
/
button on the remote control in step 4,5,6,7.
16
).
TIMER is displayed.
and
.
and
.
and
.
and
.
to adjust the volume level and press
to select the source to be played when the system
You must also...
Insert a recorded cassette in the deck.
•
Select the FM or AM (MW/LW) frequency
•
band by pressing
and
Press PROGRAM/SET.
•
Select a preset station by pressing
•
and
button on the front panel instead of
/
Cancelling the Timer
After having set the timer, it will start automatically as shown by
the timer indication on the display. If you no longer wish to use
the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Cancel the timer........................... Once.
.
Restart the timer.......................... Twice.
MUTE
1,9
TUNER
2
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
3,4,5,6,7,8
SLEEP
EQ/S.BASS
TAPE SPEED
SHUFFLE
COUNTER RESET
REV.MODE
CD
4,5,6,7
VOLUME
TUNING
TUNING
REPEAT
MODE
+10
4,5,6,7
TA P E
Press TIMER ON/OFF...
Result:
is no longer displayed.
Result:
is displayed again.
MUTE
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
EQ/S.BASS
TAPE SPEED
SLEEP
REV.MODE
SHUFFLE
COUNTER RESET
Advertisement
Table of Contents
