Table of Contents
Advertisement
Sleep Timer
GB
You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
1
Press SLEEP on the remote control.
Result: The following indications are displayed:
2
Press SLEEP one or more times to indicate how long the system should
continue playing before it switches off:
90 MIN
OFF
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
3
To cancel the sleep timer function, press SLEEP one or more times until
OFF is displayed and the word SLEEP disappears.
TUNER
REV.MODE
MUTE Function
You can turn the sound off temporarily.
Example: You wish to answer a telephone call.
1
Press MUTE.
2
To switch the sound back on (at the same volume as before), press
MUTE again, or press the VOLUME +, - button.
REV.MODE
18
60 MIN
45 MIN
15 MIN
30 MIN
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
SLEEP
EQ/S.BASS
TAPE SPEED
1,2,3
SHUFFLE
COUNTER RESET
CD
MUTE
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
EQ/S.BASS
TAPE SPEED
SLEEP
SHUFFLE
COUNTER RESET
Connecting Headphones
You can connect a set of headphones to your micro
component system so that you can listen to music or radio
programs without disturbing other people in the room.
The headphones must have a 3.5 mm connector or
appropriate adaptor.
Connect the headphones to the Phones connector on the rear panel
(or top right corner).
Result: The loudspeakers are no longer used for sound output.
Prolonged use of headphones at a high volume may damage your
hearing.
Microphone Function (option)
The microphone enables the user to mix in his or her vocals to
sing -along with the music.
Preparation
Plug the microphone with a 3.5mm jack into microphone terminal.
.
MIC
Advertisement
Table of Contents
