Clevo P170EM Service Manual page 35

Remove screws - and the insulation plate
5. 6 9
6. Reverse the process to install a new disk (make sure you install the insulation plate).
7. Slide the HDD assembly into the bay at an angle as illustrated.
8. Make sure the insulation plate slides under the HDD bay guide at point
Slide the assembly in the direction of the arrow
9.
)
(Figure 7d
10 .
d.
9
8
10
7
and secure the assembly with the screws.
12
9
8
7
11
6
.
11
12
Removing the Hard Disk from the Secondary HDD Bay 2 - 11
Disassembly
Figure 7
Secondary HDD
Assembly Removal
d. Remove the screws and
the insulation plate.

10. HDD Insulation Plate
• 4 Screws