Start-Up; Operation With Product - Henny Penny DCW-2 Operator's Manual

3-3. START-UP

Step 2
Step 3
3-4. OPERATION WITH

OPERATION WITH PRODUCT

Before using, the Henny Penny Heated Display Cabinet
should be thoroughly cleaned as indicated in the Shut-Down
and Cleanup section of this manual.
1. Move all switches and controls on the cabinet to the OFF
position.
2. Turn on power supply for the cabinet at the main circuit
breaker.
3. Place the grids in the lower level.
4. Install the perforated bun pans well.
5. Close the doors.
6. Turn the power switch to the ON position.
7. Turn the light switch to the ON position.
8. Turn the radiant heat switch to the desired setting. We
recommend starting at "6" for the lower radiant. If you have
upper radiant, start at "4". These settings are adjustable and
may change as you become familiar with the food product
in this unit.
1. Place product on wire grids in the pans.
2. Serve product from the outside edges first. The product
closest to the door opened often will cool fastest.
3. Only leave the doors open when demand requires. During
slow periods, keep the doors closed.
10