Download Print this page
Lennox Hearth Products RAVELLE 30 Installation Instructions
Lennox Hearth Products RAVELLE 30 Installation Instructions

Lennox Hearth Products RAVELLE 30 Installation Instructions

Arch and classic face and inset kits

Advertisement

INSTALLATION INSTRUCTIONS FOR INSTALLING ARCH AND CLASSIC FACE KITS
FOR USE WITH THE RAVELLE 30 AND RAVELLE 42 DIRECT VENT GAS FIREPLACES
KIT CONTENTS (See Figure 1):
Please ensure that all these parts are in one of the two boxes.
See complete list of kits available on Page 4.
1 ea. Face, (Large box) Item #1
1 ea. Insets (Two insets in small box), Item #2
2 ea. Mounting brackets (Included in large box) Item #3
1 ea. Bolt Kit (Includes 2- lower mounting screws and
14 ea. 10/24 nuts) (Included in large box) Item #4
1 ea. Instruction Sheet
TOOLS NEEDED:
3/8" Nutdriver or Wrench
Phillips Screwdriver
Arch Face -
Required to
Complete Face: Insets
RAVELLE 30
RAVELLE 42
Cat. No.
Cat. No.
75286
75294
75288
75296
75287
75295
75289
75297
Insets - Required,
Includes 1 Top &
1 Bottom Inset)
RAVELLE 30
RAVELLE 42
Cat. No.
Cat. No.
75306
75322
75308
75324
75307
75323
75309
75325
75330
75338
75332
75340
75331
75339
75333
75341
75298
75314
75300
75316
75299
75315
75301
75317
775,253M
Rev. A, 06/2010
Description
Black Face
Gold Face
Brushed Nickel Face
Black Nickel Face
Aspen™
Napa™
Tuscan™
Description
ASPEN Black
ASPEN Gold
ASPEN Brushed Nickel
ASPEN Black Nickel
NAPA Black
NAPA Gold
NAPA Brushed Nickel
NAPA Black Nickel
TUSCAN Black
TUSCAN Gold
TUSCAN Brushed Nickel
TUSCAN Black Nickel
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
ARCH AND CLASSIC FACE AND INSET KITS
MODELS RAVELLE™ 30 AND RAVELLE 42
Classic Face -
Required to
Complete Face: Insets
RAVELLE 30
RAVELLE 42
Cat. No.
Cat. No.
75282
75290
75284
75292
75283
75291
75285
75293
Insets (Required -
Includes 1 Top &
1 Bottom Inset)
RAVELLE 30
RAVELLE 42
Cat. No.
Cat. No.
75310
75326
75312
75328
75311
75327
75313
75329
75302
75318
75304
75320
75303
75319
75305
75321
75334
75342
75336
75344
75335
75343
75337
75345
Item #3
Item #4
Figure 1 - Kit Contents
HEARTH PRODUCTS
KITS AND ACCESSORIES
Description
Black Face, Classic
Gold Face, Classic
Brushed Nickel Face, Classic
Black Nickel Face, Classic
Aspen
Napa
Tuscan
Description
ASPEN Black
ASPEN Gold
ASPEN Brushed Nickel
ASPEN Black Nickel
NAPA Black
NAPA Gold
NAPA Brushed Nickel
NAPA Black Nickel
TUSCAN Black
TUSCAN Gold
TUSCAN Brushed Nickel
TUSCAN Black Nickel
Item #1
Item #2
TM
1

Advertisement

loading

Summary of Contents for Lennox Hearth Products RAVELLE 30

  • Page 1 MODELS RAVELLE™ 30 AND RAVELLE 42 INSTALLATION INSTRUCTIONS FOR INSTALLING ARCH AND CLASSIC FACE KITS FOR USE WITH THE RAVELLE 30 AND RAVELLE 42 DIRECT VENT GAS FIREPLACES KIT CONTENTS (See Figure 1): Please ensure that all these parts are in one of the two boxes.
  • Page 2 GENERAL INFORMATION All of these parts may scratch and bend, great care should be used in handling them. If you encounter any problems, need clarification of these instructions or are not qualified to properly install this kit, contact you local distribu- tor or dealer.
  • Page 3 30 Arch face uses the smaller brackets with a measurement of 2 inches across the top (See Figure 4B, item #1). The mounting brackets you will use for the Ravelle 30 Classic face will be the longer brackets with a measurement of 3-1/2 inches across the top (See Figure 4B, item #2).
  • Page 4: Face Installation

    Figure 7 Expanded View Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2010 Lennox Hearth Products Lennox Hearth Products P/N 775,253M REV.

This manual is also suitable for:

Ravelle 42