Installing the I/O Board
1.
Connect the I/O board connector and slide the I/O board into its slot in the computer.
2.
Tighten the screw to secure the I/O board to the computer.
3.
Connect the ExpressCard module connector to the I/O board.
4.
Install the:
a) palmrest
b) hard drive
c) optical drive
d) keyboard
e) keyboard trim
f) base cover
g) battery
h) SD card
5.
Follow the procedures in
Removing the Switch Board
1.
Follow the procedures in
2.
Remove the:
a) battery
b) base cover
c) keyboard trim
d) keyboard
e) optical drive
f) hard drive
After Working Inside Your Computer .
Before Working Inside Your Computer .
41