Installing The Hinge Cover; Removing The System Board - Dell Precision Mobile Workstation M4700 Owner's Manual

a) battery
b) base cover
c) keyboard trim
d) keyboard
e) optical drive
f) hard drive
g) palmrest
h) display assembly
3. Remove the screws that secure the hinge cover to the computer. Remove the hinge cover from the computer.

Installing the Hinge Cover

1. Place the hinge cover in its position on the computer.
2. Tighten the screws to secure the hinge cover to the computer.
3. Install the:
a) display assembly
b) palmrest
c) hard drive
d) optical drive
e) keyboard
f) keyboard trim
g) base cover
h) battery
4. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) keyboard trim
After Working Inside Your Computer .
Before Working Inside Your Computer .
47