Security Settings - Intel MB966 User Manual

Security Settings

This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and
Setup utility. User Password sets a password that will be used exclusively
on the system. To specify a password, highlight the type you want and
press <Enter>. The Enter Password: message prompts on the screen.
Type the password and press <Enter>. The system confirms your
password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be
disabled. Once the password is disabled, the system will boot and you can
enter Setup freely.
Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
BIOS SETUP UTILITY
PCIPnP Boot
: Not Installed
: Not Installed
[Disabled]
MB966 User's Manual
BIOS SETUP
Security
Chipset
Install or Change the
Password.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Exit
47