Table of Contents
Advertisement
STEP 5 (See Diagram 5)
A.) Attach the Backrest Board (#18) to the Backrest Support (#10).
B.) Secure it with three M8 x 2 5/8" Allen Bolts (#37) and Ø 5/8" Washers (#6).
C.) When adjusting the Backrest Board to an incline position, simply pull up the Board. When
adjusting the Board to decline or flat positions, press or step down on the Backrest
Adjustment Lever (#14) to disengage the Lever to allow the Board to go down.
19
DIAGRAM 5
Advertisement
Table of Contents
