Impex IGS-6500 Owner's Manual page 11

STEP 5 (See Diagram 6 & Cable Loop Diagram)
A.) Attach the Height Adjustment Handle (#36) to the Right Lock Switch (#10) on the Pulley
Carriage (#8). Secure it with one M5 x 3/8" Allen Bolt (#71). Repeat the same procedure to
install the other side.
B.) Connect the Single Handle (#31) to the Cable (#17) on the Right Station (#1) with a Hook
(#54). Repeat the same procedure to install the other side.
C.) Replace the Single Handle with the Ankle Strap (#37) for various Leg Exercises.
D.) Lift up the Height Adjustment Handle (#36) and slide the Pulley Carriage along the Pulley
Carriage Support Frame to the selected level. Release the Handle to lock the Pulley
Carriage in position.
10