Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
Tools Required For Assembling the Machine: One Adjustable Wrench and Allen
Wrench
NOTE: It is strongly recommended this rack be assembled by two or more people to
avoid possible injury.
STEP 1
(See Diagram Below)
A.) Connect one Horizontal Rack (#3) to the Left and Right Upright (#1 & #2). Secure each
end with one M10 x 3/8" Allen Bolts (#4). Do not tighten all the Nuts and Bolts yet.
B.) Repeat the above procedure A to install the other Horizontal Racks.
C.) Securely tighten all Nuts and Bolts.
EXPLODED DIAGRAM
5
Advertisement
Table of Contents
