Assembly Instructions - Impex AIR-1 Owner's Manual

ASSEMBLY INSTRUCTION
 Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
 NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
A.) Do not tighten Bolts until instructed to do so.
B.) Attach the Front Stabilizer (#39) to the Main Frame (#35). Secure it with four M8 x 5/8" Allen Bolts (#5)
and four  5/8" Washers (#6).
C.) Attach the Rear Stabilizer (#55) to the Main Frame. Secure it with four M8 x 5/8" Allen Bolts (#5), and
four Ø 5/8" Washers (#6).
D.) Securely tighten all Bolts.
E.) Use the four Floor Level Adjustment Knobs (#38) to stabilize the Bike on floor.
© IMPEX INC. 6