Changing The Settings - Fisher & Paykel CG363ML User Manual

Sound preference settings
The CookSurface has three pre--set sound preference settings (tones, tone volume, feedback
tones).
Changing the settings
To change the settings, follow these steps.
......... _D .......
o <S>°
ooo2 seconds
S 8 s
<
_ooSseconds
Hold down the on/off power button
for two seconds, This sets the
keylocL
\
Firmly press both the on/off power button
and the nearest burner control dial for three
seconds.
i i
Bt
.... _........ ii iii:i
ii iii
Once you are in the Sound preference
mode, the on/off light will flash every
second and the burners' pan supports
will rise, The keylock light will go out,
Turn the dial clockwise to highlight the
first setting, The other two lights will be
dimmed,
Each setting has two options (see table
following), Turn the dial to highlight each
setting,