American DJ Accu Spot 250 User Instructions page 9

Accu Spot 250™
2. Tap the UP button until "NODE" is displayed, press ENTER.
3. Tap the UP button until "SLAV" is displayed, press ENTER.
4. Press ENTER, the display will show "ON/OFF".
5. Press the UP button to select "ON" to activate this unit as a
slave, or "OFF" to deactivate this unit.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
RUN
With the function "RUN", you can run the units inter-
nal program. You can set the number of steps under Step.
You can edit the individual scenes under Edit. You can run
the individual scenes either automatically "AUTO", or sound-
active "SOUN". The selection "ALON" means stand alone and
"MAST" means that the unit is designated as the master in
master/slave mode.
1. Access the main menu.
2. Tap the UP button until "NODE" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. "AUTO" is displayed. If you press the UP button it will show
"SOUN". Select which one you want to activate, and press
ENTER.
5. Press UP, to select "ALON" or "NAST". Which mean stand
alone, and master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
DISP
Display the DMX-512 value of each channel -
1. Access the main menu.
American DJ - www.americandj.com - Accu Spot 250™ Instruction Manual Page 17
®
System Menu Accu Spot 250™
2. Tap the UP button until "NODE" is displayed, press ENTER.
3. Tap the UP button until "DISP" is displayed, press ENTER.
4. "VALU" should now be displayed, press ENTER.
5. The display should show "D-00". Press the UP button in
order to select the desired channel. If you select "D-05" the
display will only show the DMX value of the 5th channel
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
CLDI
1. Access the main menu.
2. Tap the UP button until "NODE" is displayed, press ENTER.
3. Tap the UP button until "DISP" is displayed, press ENTER.
4. "CLDI" should now be displayed, press ENTER.
5. The display will show "ON/OFF". Press the UP button to
select "ON" to activate this function, or "OFF" to deactivate this
function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
LAMP MAIN MENU -
OPEN
via the control board.
1. Access the main menu.
2. Tap the UP button until "LAMP" is displayed, press ENTER.
American DJ
Shuts off digital display after 2 minutes.
With this function you can switch the lamp on or off
- www.americandj.com - Accu Spot 250™ Instruction Manual Page 18
®
System Menu