American DJ Accu Spot 250 User Instructions page 11

Accu Spot 250™
3. Tap the UP button until "RTILT" is displayed, press ENTER.
4. Press ENTER, the display will show "ON/OFF".
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
REST
- When you activate the reset function, the fixture
will begin the reset motion.
1. Access the main menu.
2. Tap the UP button until "SET" is displayed, press ENTER.
2. Tap the UP button until "REST" is displayed, press ENTER.
3. The display will show "ON/OFF".
4. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press EXIT/DN to return to the main menu.
LODA
- With this function you can restore the factory
settings of the device. All settings will be set back to the
default values. Any edited scenes will be lost. When restor-
ing the factory settings the unit must be set to the address
that the unit was in when you started editing.
1. Access the main menu.
2. Tap the UP button until "SET" is displayed, press ENTER.
3. Tap the UP button until "LODA" is displayed, press ENTER.
4. The display will show "ON/OFF".
American DJ - www.americandj.com - Accu Spot 250™ Instruction Manual Page 21
®
System Menu Accu Spot 250™
5. Press the UP button to display "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
When you exit this function, the unit will begin to reload
data.
VER
the unit.
1. Access the main menu.
2. Tap the UP button until "SET" is displayed, press ENTER.
3. Tap the UP button until "VER" is displayed, press ENTER.
4. The display will show "V-X.X", "X.X" stands for the version
number, such as the display may show "V-1.0", "V-2.6" etc.
5. Press ENTER or EXIT/DN to exit.
ADJU MAIN MENU -
TEST
1. Access the main menu.
2. Tap the UP button until "ADJU" is displayed, press ENTER.
3. Tap the UP button until "TEST" is displayed, press ENTER.
4. The display will show "TE-X", "X" stands for the channel
number, if you selected "TE-3", the unit will test the color chan-
nel, change the color one by one and show the rainbow effect
with different speeds.
5. Press ENTER or EXIT/DN to exit.
American DJ
©
- Use this function to display the Software version of
- This will test the functions of each channel.
- www.americandj.com - Accu Spot 250™ Instruction Manual Page 2
®
System Menu