Removing Excess Humidity
Remote Control
Control Panel
0
E-
If the atmosphere in your room is very humid or damp,you can remove
excess humidity without lowering the room temperature too much.
If necessary, press the
Result:
The air conditioner starts up in the Cool mode.
The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being.
Plugged in
Stopped
It will begin to cool after three minutes
If the dry indicator is not displayed at the top of the control panel, press the
button on the control panel one or more times until it appears.
Result:
The unit beeps each time you press the
The air conditioner runs in Dry mode.
You can change modes at any time.
To adjust the temperature, press the
3
times until the required temperaturs is displayed.
Possible temperatures are between 8°C and 30°C inclusive.
Result:
Each time you press the
- The temperature is adjusted by °C
- The unit beeps
The air conditioner starts removing the excess humidity;
the quality of air is adjusted automatically.
4
To control the direction of the air flow,refer to page .
(On/Off) button.
or
buttons one or more
or
buttons:
button.