Table of Contents
Advertisement
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room, you can adjust the
orientation of the inner air flow blades on the right-hand side of the unit,
thus increasing the efficiency of the air conditioner.
Press the
(or
Result:
The inner blades swing automatically left and right.
In the Energy Saving mode, the blades may stop when the
compressor is off. For details on the Energy Saving mode,
refer to page 5.
To stop the blades moving left and right, press the
button on the remote control.
To stop the blades in a specific position and orient the air flow in the
corresponding direction, simply press the
button on the remote control when the blades are in the desired position.
Adjusting the Air Flow Direction Vertically
Again depending on the position of the unit in your room, you can
adjust the orientation of the outer air flow blades on the right-hand
side of the unit.
RECOMMENDATION
Adjust the air flow blades to the desired position, by pushing them upwards or
downwards.
If you orient the air flow blades downwards and the unit operates in Cool mode
for a long period of time, dew may:
From on the surface of the blades
Drip from the blades
on the unit) button on the remote control.
(or
When...
Adjust the blades to face...
Cooling
Upwards.
Remote Control
(or
on the unit)
on the unit)
Control Panel
E-
Advertisement
Table of Contents
