Solving Common Problems; Technical Specifications - Samsung AZ12PHHEA Owner's Instructions Manual

Window-type room air conditioner ( cool and heat )
Table of Contents

Advertisement

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save
you the time and expense of an unnecessary call.
Problem
The air conditioner does not
operate at all triggered.
The air conditioner does not
operate with the remote control
No beep is heard when you press
(On/Off) on the remote control
The air conditioner does not cool or
heat.
When heating, the required room
temperature is never reached and
the air conditioner frequently stops
The air flow direction does not
change when you press AIR SWING
The timer is not correctly triggered
Odours are permeated in the room
during air conditioning

Technical Specifications

18
E-
Explanation/Solution
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the operating mode indicator(COOL, FAN or HEAT) on
the unit is lit up; if necessary press
or unit.
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards
or less).
Check that you are pointing the remote control at the remote
control sensor on the unit.
Replace the remote control batteries if necessary.
Check that the correct operating mode has been selected
COOL or HEAT.
The room temperature may be too low or too high.
Dust may be blocking the air filter; refer to page 17 or 18 for
cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of
the unit.
Check that the required temperature has been set correctly.
Increase the fan speed.
If the air flow is directed downwards, direct it upwards.
Check that the air conditioner has been switched on; if necessary,
press
(On/Off) on the remote control or unit.
Check that the timer has been programmed correctly;
see page 12~14.
Air the room.
Design and specifications are subject to change without notice.
Model
✴✴✴✴✴✴✴EA
(On/Off) on the remote control
Power Supply
220-240V~, 50Hz

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Az09phhea

Table of Contents