Setting the Sleep timer
Remote Control
Control Panel
14
E-
The Sleep Timer can be used when you are cooling or heating your
room to switch the air conditioner off automatically after a period of
8 hours.
➢
If you wish to switch the unit off at a specific time, refer to page 13.
1
Make sure that you have selected either COOL or HEAT mode.
2
Press the
button on the remote control
or
Press the
button on the unit until the SLEEP indicator lights up.
Result:
Each time you press a button, the unit beeps.
◆
The "SLEEP" passes through the control panel for about
◆
15 seconds and the "
The remaining time is displayed and decreased by 1 hour
◆
automatically to indicate the remaining time.
The air conditioner will be controlled as illustrations below.
◆
Cooling
When the temperature has
been increased by 1°C (after
1 hour), it is maintained for 7
hours.
Heating
The temperature is decreased
by 1°C after 1 hour.
When it has been decreased
by 2°C (after 2 hour), the
temperature is maintained for
6 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
on the remote control.
◆
or
on the unit.
◆
Result:
The unit beeps.
◆
The SLEEP indicator is no longer displayed.
◆
The air conditioner operates in the mode selected last.
◆
" will be displayed.
Set
TEMP.
1hr
8hr
Start
Stop
time
time