Operating the ERV
Select ERV function to ventilate the room.
1
Press the
button to start ERV ventilating system.
Result:
T he fan speed will be displayed as High
2
Press the
button to select the fan speed.
You can adjust the fan speed by pressing the
button. The fan speed changes in order of High
Turbo
Med
To stop the ERV, press the
fan speed is Med
Note
If you press the
connected to the multi function wired remote
controller, you can turn on/off both of ERV and the
air conditioner at the same time or turn on/off the
air conditioner only. The default setting is turning
on/off both of them.
(Refer to the installation manual.)
The
button operates when more than 1 ERV
unit is connected to the multi function wired remote
controller.
If not,
button.
ERV operates in heat exchange mode only.
button again when the
button when ERV unit is
will be displayed when you press the
15
E-