Brewing Buttons Programming - Saeco IDEA Idea Instruction And Maintenance Manual

STEAM
(Except COFFEE set-up)
• Immerse the spout (17) in the beverage to be heated.
• Turn the knob counterclockwise (12). When the required
temperature is reached, close the knob (clockwise).
After every operation, clean the steam spout with a (damp
and clean) cloth/sponge from the residues of the previously
heated beverage.
(*) Before any brewing, place the milk suction tube (30 - F. 4)
inside the milk container.
(**) Adjust the cream quantity using the pin (24 - F. 4)
(Pr. 12.8).
12.6

Brewing buttons programming

The beverage quantities linked to the respective buttons, can be
directly programmed by keypad.
To program and re-program the buttons follow these instructions:
- Switch on the machine and prepare it for the use
- Place the container under the selected spout
- Push and hold the button. The message
"PROGRAMMING" will be displayed
- Release the button and set the dose to be brewed
(***) N.B.: Keys ,
beverages with any possible combination of milk and cof-
fee. Please refer to an authorized customer service center
to change default settings.
Here is the button programming scheme.
and can be preset for brewing
English
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
157