Pro-Form 700 Cardio Cross Trainer User Manual page 5

ASSEMBLY
Assembly requires two persons, Place all parts of the eliipticaI crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembty is completed In addition to the
included allen wrenches, assembly requires a phillips screwdriver _, an adjustable
wrench _, and a rubber mallet f--------_ °
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 22 The second number refers to the quantity used in assembfy_ Note: Some small parts may have been
pre-assembled for shipping° If a part is not in the parts bag, check to see if it has been pro-assembled°
M4 x 16mm M8 Nylon M10 Nylon
Screw (66)-2 Locknut (46)-4 Locknut (29)-6
Frame Spacer (83)-1 M 10 Split
Washer (70)-4
M 10 3 Black
Washer (53)-2
MI0
Washer (38)-6
Adjustment Bait (20)-2
M8 x 19mm Button
Screw (22)-2
M10 x 27mm
Screw (71)-3
M8 x 45mm Button Bolt (91)-4
M10 x 78mm Button Bolt (27)-2 _
M10 x 88mm Button Bolt (63)-1 i_
M10 x 112mm Carriage Bolt (34)-4
5