Table of Contents
Advertisement
1-6 Control Panel
Hex Dump Analysis
1. Switch on the printer while holding the MENU1/Menu2 button. The USER MNT
(User Maintenance) message will be displayed in the window.
2. Press the MENU1/Menu2 button for less than two seconds twice to display HEX
DUMP, after MENU RESET.
3. Press the ENTER/Power Save button, the printer now displays the ON-LINE/HEX
DUMP message.
4. The printer will now print received data in HEX dump format.
5. To resume normal printing, switch off the printer, then switch it on again.
When the data sent to the printer reaches a full page, the printer will start printing. If
the data does not contain a full page, it will be necessary to place the printer off-line
and then press the Form Feed button to start printing.
When the analysis is finished, switch off the printer to exit the HEX dump mode.
Cleaning Page
1. Press the
off line mode.
2. The message DRUM CLEANING PAGE/MANUAL A4 will appear in the
message window, MANUAL A4 SIZE REQUEST will scroll right to left.
3. Insert a blank page in the manual feed tray and press the Form Feed button.
4. The printer will process the blank page and at the same time remove any traces of
toner from the image drum, after completion the printer will return to the ON-
LINE mode.
OL1200ex LED Page Printer
/Recover and
/Reset buttons together while the printer is in the
Advertisement
Table of Contents
