Daewoo DTG-28 Manual Instruction page 13

TIMER (SUB MENU)
1. CLOCK
Place the cursor at CLOCK by using DOWN/UP button and the dash( - - ) of
CLOCK mode start to flicker. The CLOCK will be changed by pressing
LEFT/RIGHT button. Press the ENTER button after setting the hour, the dash( - - )
of the minute start to flicker. Continually pressing the ENTER button or DOWN/UP
button after setting the minute like the hour, the cursor will be place at ON TIME or
OFF TIME. If the MAIN POWER switch (
becomes initial mode.
2. ON TIME
ON TIME mode is changed as like OFF
EVERY whenever LEFT/RIGHT button is pressed. Set
ON TIME mode to ONCE or EVERY. After that, set ON
TIME by using LEFT/RIGHT button like CLOCK mode.
If ON TIME mode is OFF, then you can't set ON TIME.
3. ON TIME POS. NO
Place the cursor at POS. No and select the programme number by using
LEFT/RIGHT button or PR SELECTION buttons 0-9. Then the TV will be
always switched on with this programme automatically on setting time.
4. OFF TIME
Place the cursor at OFF TIME and set the time as ON TIME mode.
Press the ENTER button after setting the hour and the minute.
) on the TV SET is turned off, it
ONCE
12
TIMER
CLOCK 09:00
ON TIME ONCE
09:30
B
POS. 03
OFF TIME OFF
- - : - -