Daewoo DTG-28 Manual Instruction page 12

PICTURE (SUB MENU)
The wanted function is selected by moving the cursor with DOWN/UP button.
The LEFT/RIGHT button are used to adjust the analog level.
1. BRIGHTNESS
Adjust for natural brightness if the picture appear too dark or
light.
2. CONTRAST
This is used to obtain satisfactory range of the tone between black and white. A bright
room will need the higher contrast setting than a dark room.
3. COLOR
Adjust the strength of the colour as preferred.
4. SHARPNESS
This is used to change the sharpness degree of the picture. It is the most usable
when watching programmes from the external source such as a VCR.
5. TINT; ONLY NTSC
This is used to adjust tint of the NTSC color picture.
6. B/B (BACK BLUE)
When there is no signal and B/B is ON, the display is blue. In case that B/B is OFF by
pressing LEFT or RIGHT button, the noise signal will be displayed on the screen.
other content is upper.
SOUND (SUB MENU)
1. BASS
Place the cursor at BASS by using DOWN/UP button
and adjust the sound of the low frequency band by
using LEFT/RIGHT button.
2. TREBLE
Place the cursor at TREBLE and adjust it as BASS mode.
It is used to adjust the high frequency band.
3. BALANCE
This is used to control the strength of left or right each SPEAKER by using
LEFT/RIGHT button.
11
PICTURE FAVORITE
B |||||||||||||||| . . . .
BRIGHT 60
||||||||||||||||||| .
CONT 90
|||||||||||||||||| . .
COLOR 80
|||||||||||||||| . . . .
SHARP 60
0 ........... || . . . . . . . . . .
TINT
B/B ON
SOUND MEMORY
||||||||||| . . . . . . . . . .
BASS 50
B
||||||||||| . . . . . . . . . .
TREBLE 50
........... || . . . . . . . . . .
BALANCE 0