Audio Recording; Preparing To Record - Roland DP90e Owner's Manual

Practicing

Audio Recording

Here's how to record what you play on the unit as audio data. The recorded song can be used on your computer.

Preparing to record

1.
Connect a USB flash drive (sold separately) to the
USB memory port (p . 10) .
* Audio data cannot be saved in the unit itself.
2.
Select the tone that you want perform (p . 14) .
3.
While holding down the [
4.
Press the [ ] (Rec) button .
The [ ] (Rec) button will light, the [
If you decide not to record, press the [
5.
If desired, sound the metronome (p . 22) .
Starting/stopping recording
1.
Press the [ ] (Play/Stop) button .
Recording will start.
When recording starts, the [
will light.
NOTE
Never turn off the power or disconnect the USB flash drive during recording.
2.
Press the [ ] (Play/Stop) button .
Recording will stop, and a confirmation message will ask whether you want to save the recording.
3.
Either save the performance or erase it (p . 30) .
34
] (Rec) button, press the [–] [+] buttons to select "Audio . "
] (Play/Stop) button will blink, and the unit will enter recording-standby mode.
] (Rec) button once again.
] (Rec) button and [ ] (Play/Stop) button
3
1 2
4