Table of Contents
Advertisement
5.
Hand-tighten the screws (large)
the pedal board
to the side boards
5
3
5
Screws (large): use two screws
8
6.
Firmly tighten each of the side board screws (four locations)
that you provisionally tightened in step 1, making sure that
they are secure .
3
7.
Step on the pedals of the pedal board
that the rubber feet on the bottom of the pedals are in
contact with the fl oor . Firmly tighten the pedal board
screws
(two locations) that you provisionally tightened
8
in step 5, making sure that they are secure .
8.
Align the protruding screws (one each at right and left)
on the bottom of the piano
metal fi ttings on the side board
forward until the screws are held in place .
Place the keyboard so that it is centered, both front to back and left
to right.
NOTE
Grasp the piano
in the middle at the front and rear, taking care
1
not to pinch your hands.
Screws (large): use two screws
8
Used in step 9.
9.
Use the screws (large)
to fasten the piano main unit
8
the side boards
,
(one each for the right and left) .
2
3
Make sure to insert the screws
by hand before using a screwdriver to tighten them.
to provisionally fasten
8
,
(two locations) .
2
3
2
2
, and make sure
5
5
with the openings in the
1
,
, then slide the piano
2
3
1
Front
Please don't
get your fi ngers
pinched
1
by hand and give them a few turns
8
10.
Connect the speaker cord extending from the rear of the
speaker box to the piano main unit's speaker connector .
Rear DP90/DP90S
Speaker connector
Speaker cord
11.
Use screws (with washers)
.
12
Screws (with washers): use two screws
10
1.
DC In jack
12.
Connect the AC adaptor to the DC In jack, the pedal cord to
the Pedal jack .
13.
Connect the supplied AC adaptor and power cord .
Place the AC adaptor so the side with the indicator faces upwards and
the side with textual information faces downwards. The indicator will
light when you plug the AC adaptor into an AC outlet.
14.
As necessary, affi x cord clamps to fasten the pedal cord .
When moving the unit
If you need to move the unit, close the keyboard cover and
to
disconnect the AC adaptor. With at least one other person
helping you, lift the unit horizontally and carry it, taking care
not to pinch your hands or drop the unit on your feet.
Clip
portion
Hold and insert the cord so that the
clip portion extends into the stand
and is securely connected.
to fasten the headphone hook
10
Pedal cord
AC adaptor
Firmly plug the AC adaptor
and the pedal cord all the way
into the sockets.
Power cord
Example attachment location
Cord clamps
To AC outlet
63
Advertisement
Table of Contents
