Table of Contents
Advertisement
Changing the left-hand tone
1.
While holding down the [Transpose] button and [Twin Piano] button, press a tone button .
The number and name of the tone currently selected for the left-hand zone are shown.
2.
While holding down the [Transpose] button and [Twin Piano] button, press the [–] [+] buttons .
A different tone is selected.
Advanced technique
Changing the pitch of the left-hand tone in steps of an octave: Octave Shift (p. 47)
Changing the keyboard's split point
1.
While holding down the [Transpose] button and [Twin Piano] button, press the key that you want to assign as the split point .
The key you pressed becomes the new split point, and that key will be shown in the display.
Screen
* In the display, a quotation mark (") signifies a sharp (#).
1
Left-hand Tone
1
Value
B1–B6
(default: F#3)
2
Range in which you can specify the split point (B1–B6)
Split Point
Power-up default: F 3
The split point you specify becomes the
highest note of the left-hand section .
Saving your settings
The unit's settings will revert to the
default values when you turn off the
power, but you can save them as
described in "Retaining the Settings
Even After Power-off (Memory Backup)"
(p. 39).
Performing
Right-hand Tone
17
Advertisement
Table of Contents
