Table of Contents
Advertisement
Recording the Song You're Practicing
It's easy to record your own performances.
You can play back a recorded performance to check your playing, or perform along with a recorded performance.
The unit lets you record in the following ways.
Type of recording
Explanation
Parts will be separate.
You can re-record a specific portion of the song.
SMF recording
You can overdub.
* Normally, you should use SMF recording.
Your performance will be recorded as audio data. The recorded song can be used on your computer.
Audio recording
* In order to use audio recording, you must connect a USB flash drive (sold separately) to the USB memory port (p. 10).
* SMFs (Standard MIDI Files) use a standard format for music file that was formulated so that files containing music file could be widely compatible,
regardless of the manufacturer of the listening device. An enormous variety of music is available, whether it be for listening, for practicing musical
instruments, for Karaoke, etc.
SMF Recording
To record a new song, proceed as follows.
This method is convenient when you simply want to record your performance as easily as possible.
Getting ready to record
1.
Select the tone that you want to use for performing (p . 14) .
2.
Press the [
] (Rec) button .
The [
] (Rec) button will light, the [
recording-standby mode.
If you decide not to record, press the [
3.
If desired, sound the metronome (p . 22) .
MEMO
If you change the metronome's tempo and time signature, they will be recorded with the song, allowing the metronome to sound correctly during
playback.
Starting/stopping recording
1.
Press the [
] (Play/Stop) button .
A two-measure count will be heard (the measure number will be shown as "-2"
then "-1" in the lower right of the display), and then recording will start.
When recording starts, the [
will light.
MEMO
You can also initiate recording by simply playing the keyboard. If you initiate recording by playing the keyboard, a count will not be sounded.
2.
Press the [
] (Play/Stop) button .
Recording will stop, and a message will ask whether you want to save your performance.
] (Play/Stop) button will blink, and the unit will enter
] (Rec) button once again.
] (Rec) button and [
] (Play/Stop) button
Practicing
2
1
2
29
Advertisement
Table of Contents
