Audio Recording - Roland HP505 Owner's Manual

Practicing

Audio Recording

Here's how to record what you play on the unit as audio data. The recorded song can be used on your computer.
HP505 only
* Thanks to its multiple number of speakers, each of which can be used to play a different portion of the overall sound, the unit is capable of
producing piano sounds that possess great depth and seem to have three-dimensional presence.
Such effects are produced when you play something on the keyboard, or when you play back a song that's been recorded as an SMF.
However, when you make an audio recording, the song will consist of two channels (stereo), and such effects cannot be reproduced.
Preparing to record
1.
Connect a USB flash drive (sold separately) to the
USB memory port (p . 10) .
* Audio data cannot be saved in the unit itself.
2.
Select the tone that you want perform (p . 16) .
3.
While holding down the [
4.
Press the [ ] (Rec) button .
The [ ] (Rec) button will light, the [
If you decide not to record, press the [
5.
If desired, sound the metronome (p . 24) .
Starting/stopping recording
1.
Press the [ ] (Play/Stop) button .
Recording will start.
When recording starts, the [
will light.
NOTE
Never turn off the power or disconnect the USB flash drive during recording.
2.
Press the [ ] (Play/Stop) button .
Recording will stop, and a confirmation message will ask whether you want to save the recording.
3.
Either save the performance or erase it (p . 32) .
36
] (Rec) button, press the [–] [+] buttons to select "Audio . "
] (Play/Stop) button will blink, and the unit will enter recording-standby mode.
] (Rec) button once again.
] (Rec) button and [ ] (Play/Stop) button
4
3
1 2