Track Display; Track Recording Step; Clear Track; Remaining Track - AvMap EKP-IV User Manual

14.4.1 TRACK DISPLAY

Track display On will display track history on the Moving Map. All track data
stored in the unit memory will be displayed. The default setting is Off.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' + "TRACK DIS-
PLAY" + 'ENTER'

14.4.2 TRACK RECORDING STEP

The EKP-IV stores up to 5,000 data points to display a pattern of aircraft move-
ment (Track).
After 5,000 intervals the oldest is deleted with each new position fix point. The
following options assist in getting the most track memory for your type of
flying.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' + "TRACK RE-
CORDING STEP" + 'ENTER'
Distance - will store a fix point at the specified interval of distance.
Time - will store a fix point at the specified interval of: 5 sec, 30 sec, 1 min.
Auto - this allows for the most efficient use of the memory as the software will
determine when to store a fix point based on straight and curved flight paths.
The default setting is Auto.

14.4.3 CLEAR TRACK

Deletes all of the Track history and begins new.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' + "CLEAR TRACK"
+ 'ENTER'
After pressing 'ENTER' a window appears; press 'ENTER' to confirm dele-
tion or 'CLEAR' to abort function. The message "DONE" will appear con-
firming the action.

14.4.4 REMAINING TRACK

The remaining track memory is displayed on the Track Setup Menu page. The
number displayed will be points, time, or distance based on the recording step
selection.

14.5 UNITS SET-UP

This sub-menu contains the various options that define how the EKP-IV dis-
plays units of measurement.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER'
84 User Manual