Hsi Menu; Add Mark Under Fix; Setup Datafields; Default Datafields - AvMap EKP-IV User Manual

5.2 HSI MENU

When on the HSI screen, pressing 'MENU' will access the HSI Menu with the
following options:
Add Mark under Fix, Setup Data Fields, Default Data Fields and Compass
Orientation.

5.2.1 ADD MARK UNDER FIX

While in HSI mode, it is possible to create a User Mark under the current
position fix. From the HSI screen:
> 'MENU' + "ADD MARK UNDER FIX" + 'ENTER'
An information box will appear confirming the creation of the User Waypoint
and informing of the default name applied by the software; press 'ENTER' to
accept. To edit this Mark see Par. 8.1.3 and Par. 8.2.2.

5.2.2 SETUP DATAFIELDS

The HSI Data Window can be customized by the user to display navigational
data required for his flight; similar to the Moving Map Data Window (see Par.
3.2). You can edit the data fields from the HSI page:
> 'MENU' 1 sec. + "HSI SCREEN" + 'ENTER' + 'MENU' + "SETUP DATA FIELDS..." + 'ENTER'
After pressing 'ENTER' a box in the Data Window will be highlighted. Select
the box to be edited and press 'ENTER'. The OPTIONS box will appear al-
lowing you to select the item to display in this box. Once selected, press
'ENTER' to accept.
You can then scroll to another box and proceed as above. Once all boxes are set
up, press 'CLEAR' to exit.

5.2.3 DEFAULT DATAFIELDS

This will restore the data field settings to the default values of Track (TRK),
Ground Speed (GS), To Descent, Distance (DST), Estimated Time Enroute
(ETE) and Altitude (ALT). From the HSI screen:
> 'MENU' + "DEFAULT DATA FIELDS" + 'ENTER'

5.2.4 COMPASS ORIENTATION

The Compass Orientation allows you to set the orientation mode for the HSI
compass to either North-up or Track-up. The Compass Orientation controls
the rotation such that track heading (Track-up or North-up) always appears at
the top of the screen.
> 'MENU' 1 sec + "HSI SCREEN" + 'ENTER' + 'MENU' + "COMPASS ORIENTATION" + 'ENTER'
44 User Manual