Table of Contents
Advertisement
R
10
10
Maintaining & Servicing Your Appliance
A. Proper Shutdown Procedure
1. Set the wall control thermostat to "OFF" on AUTOMATIC/
MANUAL SETTING screen and let the appliance com-
pletely cool. Figure 31.1. The exhaust blower must be
off before you can unplug the appliance before servicing.
2. Smoke spillage into the room can occur if the appliance
is not cool before unplugging.
3. There is a risk of shock if the appliance is not unplugged
before servicing the appliance.
Automatic
Manual
Off
Figure 31.1
B. Quick Reference Maintenance Chart
Cleaning or Inspection
Ash Pan - Burning Pellets
Ash Pan - Burning Alternate Fuels
Ash Removal from Firebox
Auto-Clean Inspection
Blower, Combustion (Exhaust)
Blower, Convection
Door Latch Inspection
Firebox - Prepare for Non-Burn Season At end of heating season
Firepot - Burning Pellets
Firepot - Burning Alternate Fuels
Glass
Heat Exchanger & Drop Tube
Hopper
Top Vent Adapter
Venting System
September 1, 2008
Frequency
Every 5 bags of fuel
Every 1 bag of fuel
More frequently depending on the
fuel type or ash build-up
More frequently depending on the
fuel type
More frequently depending on the
fuel type
More frequently depending on the
fuel type
Prior to heating season
Every 3 bags
Every 1 bag
When clear view of firepot
becomes obscured
Every 1 ton of fuel
Every 1 ton of fuel or when chang-
ing fuel types
More frequently depending on the
fuel type or ash build-up
More frequently depending on the
fuel type
7036-135E
Mt. Vernon Pellet Insert (AE)
CAUTION
Shock and Smoke Hazard
• Proper Shutdown Procedure must be followed.
• Smoke spillage into room can occur if appliance
is not cool before unplugging.
• Risk of shock if appliance not unplugged before
servicing appliance.
Follow the detailed instructions found in
this section for each step listed in the chart
below.
Daily Weekly Every 2
OR
X
OR
X
OR
X
OR
OR
OR
OR
OR
OR
X
OR
X
OR
X
OR
OR
OR
OR
Monthly
Yearly
Weeks
X
X
X
X
X
X
X
X
X
Page 31
Hide quick links:
Advertisement
Table of Contents
