What We Liked/Would Like To See - Xerox PHASER 8560 Brochure

Ease of Use
Most paper misfeeds can be easily removed from the front
or near the top of the device. BERTL analysts did not
encounter any problems or any hidden misfeed points.
Users can easily replace the printer's solid-ink "sticks." To
replace a stick, the user raises the top cover and drops
the bullet in at the top of its channel. Up to three ink sticks
can be placed in the channel at one time.
WHAT WE LIKED
•
Refilling of the solid-ink sticks is easy and clean can
be performed in a matter of seconds.
•
The only replaceable consumables are the solid-ink
sticks and maintenance kit. The waste tray can be
emptied when full by the user.
•
It is quick and easy for users to clean the reusable
paper release blade and the maintenance kit wiper
blade.
•
Most maintenance tasks are located near the front,
top or side of the device, which is accessible to most
users.
•
The ability to set up e-mail alerts notifying key
personnel when consumables need to be ordered or
when a service call or maintenance is needed.
•
The control panel displays helpful and informative
graphics that direct the user to misfeed-access areas.
Copyright © 2007 MCA Internet, LLC dba BERTL.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
The Maintenance Kit located on the right side of the
device can easily be replaced, and the wiper blade on
the roller wiped clean with every roller change as
needed.
Most minor maintenance requirements for the Xerox
Phaser 8560 can be performed in a matter of minutes
including emptying the solid-ink waste tray, which is
performed when a message appears on the control
panel informing users that the waste tray is full.
WHAT WE WOULD LIKE TO SEE
•
Overall, the Phaser 8560 proved easy to use and
maintain in testing.
May 2007
Xerox Phaser 8560
www.bertl.com
13 April 2007
Page 16