After Alls In Place - Maytag Built-in Refrigeration Manual

After Alls in Place

Once the unit is in place it must be leveled and secured to prevent any out of balance
possibilities.
A very important part of the installation process is installation of an anti-tip device. Anti-
tip devices have been around for a long time on ranges. The length of the door in relation
to the body of range makes it easy for an individual to tip the unit over if excess weight is
applied to the open door.
® ™
The Jenn-Air Luxury Series of refrigerators has a similar problem, the refrigerator
door is longer than the cabinet is deep. If excess weight is applied on the door, the unit
could tip forward.
If the cutout height is very close to the recommended height of 83¾", the cutout itself
will prevent any possible forward tipping. If there is more than one inch clear above the
cabinet, a section of 2 X 4 lumber must be mounted to the wall above the cabinet. This 2
X 4 will keep the back of the cabinet from leaning away from the wall and will help
prevent the possibility of injury or damage from a mishap. The 2 X 4 is even included
with the product
It is also possible to prevent tipping using a section of pipe strap. Attach the pipe strap to
the wall and the cabinet. This strap will prevent the unit from tipping away from the wall.
22