Test The System - Dish Network 500 Instructions Manual

T S
EST THE YSTEM
S A T
TART NY EST
1. Press the MENU button.
2. Select the
System Setup
3. Select the
Diagnostics
"Diagnostics" are just "tests."
Note:
4. Select the option for the test you want to do.
If we upgrade the receiver software,we may add new tests.
Note:
T P C
EST THE HONE ONNECTION
1. Make sure you connect a phone line to the receiver's back panel
Phone Jack.
2. Select the
Connection
displays a message that asks you to wait until
the test is done.
• If the phone connection is okay, the receiver displays a
message that says so.
• If the receiver displays a message that
it needs to make a toll-free call to the
Customer Service Center, select the
Dial Out
a message that asks you to wait until
it finishes the call. When the receiver finishes the call, select
the
Cancel
• If you didn't connect the phone line right, the receiver
displays a message that says so. Check the phone connection
and then do the test again.
: If you have a Digital Subscriber Line (DSL), you may
Note
need to install a DSL filter between the receiver and the
telephone wall jack, and then do the test again.
option.
option.
option.The receiver
option.The receiver displays
option.

Test the System

Page 119