Zip Code - DirecTV Advanced Installation Meter User Manual

3 Setting Up a Job
Tip: To delete a character, press the Back
button. You also can use or
within your entry, or press CLEAR to delete the
entry and start over. To exit without saving
changes, press CANCEL.

Zip Code

To change the zip code for a job:
1 On the MODIFY JOB SETUP screen, use
press SELECT to go to the ZIP CODE screen.
2 Using the numeric keypad, enter the zip code for the job. Then press ENTER.
The default azimuth, elevation and tilt coordinates for the job appear.
to navigate
3 Press DONE to return to the MODIFY JOB SETUP screen.
AIM User's Manual
or to highlight Zip Code and
36