Changing Volume Setting - DirecTV Advanced Installation Meter User Manual

2 Setting Up the Meter
Tip: You can temporarily turn on or turn off the
meter sound by pressing MUTE. You also can
press Fn to quickly adjust the volume setting.

Changing Volume Setting

You can change the volume setting for your AIM.
To change the volume settings:
1 Press CONFIG to go to the CONFIGURATION screen.
2 Use or to highlight Settings and press SELECT to go to the SETTINGS
screen, which shows the current settings for the meter.
3 Use or to highlight Volume and press SELECT to go to the VOLUME
screen.
4 Use or to select the desired volume setting. To turn on or off the tone that
sounds each time a key is pressed, press KEYBEEP ON / OFF.
5 Press ENTER to return to the SETTINGS screen.
AIM User's Manual
24