Hotkey Summary Table - ATEN CL5808 User Manual

Hotkey Summary Table

[Num Lock] + [A] [Enter]
[-]
or
or
[Q] [Enter]
[Ctrl] + [F12]
[B]
[Esc] or [Spacebar]
[F1]
[F2]
[F3]
[F5]
[H]
[R] [Enter]
[Station #][Port #] [Enter] Switches access to the computer that
[T]
[←]
[→]
[↑]
[↓]
5. Keyboard Port Operation
Enters Auto Scan mode.
When Auto Scan mode is in effect, [P] or left
click pauses auto scanning.
When auto scanning is paused, pressing
any key or another left click resumes auto
scanning.
Switches the beeper on or off.
Exits Hotkey mode.
Sets the operating system configuration of
the currently selected port to Windows
Sets the operating system configuration of
the currently selected port to Mac
Sets the operating system configuration of
the currently selected port to Sun
Performs a keyboard / mouse reset on the
target computer.
Switches the key combination used to enter
the Hotkey mode keys between [Ctrl] +
[F12] and [Num Lock] + [-].
This administrator-only Hotkey restores the
switch's default values. See RESTORE
DEFAULT VALUES, page 40.
corresponds to the specified Station
Number and Port Number.
Switches the OSD Hotkey between [Ctrl]
[Ctrl] and [Scroll Lock] [Scroll Lock].
Enters Skip mode and skips from the
current port to the first accessible port
previous to it.
Enters Skip mode and skips from the
current port to the next accessible port.
Enters Skip mode and skips from the
current port to the last accessible port of the
previous station.
Enters Skip mode and skips from the
current port to the first accessible port of the
next station.
53