Keyboard Module - ATEN CL5808 User Manual

CL5808/CL5816 User Manual

Keyboard Module

1
No. Component
1 Touchpad
2 Keyboard
3 Port Selection
Buttons and LEDs
4 Station ID LED
5 Station Selection
Buttons
6 Lock LEDs
7 Reset Switch
8 Keyboard
Release Catch
8
2
Standard mouse touchpad
Standard 105-key keyboard
To access a Port on the currently selected Station press its
corresponding port selection button. Indicator LEDs are built
into the switches:
An On Line LED lights to indicate that the computer
attached to its corresponding port is up and running.
A Selected LED lights to indicate which port has the KVM
focus.
In a daisy chained installation, the Station ID of the currently
selected station displays as a 2 digit figure in this panel.
See Manual Port Switching, page 29 for further details.
In a daisy chained installation, press the UP or DOWN
button to cycle to the desired Station.
The left (DOWN) button shifts the KVM focus down the
chain (Station 2
cycles back to the last station.
The right (UP) button shifts the KVM focus up the chain.
After the last station, it cycles to Station 1.
Num Lock, Caps Lock, Scroll Lock LEDs are located here.
Located to the right of the Lock LEDs. Press this recessed
switch in with a small object to perform a system reset.
These catches (one on each side) release the keyboard/
touchpad module so you can slide it away.
3
4
Description
→
Station 1, etc.). After Station 1, it
5
6
7
8