Table of Contents
Advertisement
User Manual
• It can be connected to a DVI-D (digital) monitor using a DVI cable
• Or, it can be connected to an analog VGA monitor using the provided
‡
After you have connected the adapter, Windows will automatically complete the
installation. Once the installation is done, an extended screen will appear on the add-on
monitor.
For Windows Vista, if the add-on monitor is blank, please reboot your system
again.
If required, you can connect and disconnect the add-on monitor any time without
disconnecting the adapter from the USB port on your computer.
To change the display mode, see next chapter for instructions.
During the installation, it's normal that the screen flicks black a couple of times.
Sometimes it takes time for the add-on monitor to show the video.
Using the USB to DVI Adapter
Display Properties
Display Properties allows you to configure the display mode, color quality, screen
resolution and physical arrangement of your monitors.
*The USB display adapter Display mode and adjusting Resolution, Color Depth and Refresh Rate. Please
refer to the "Display mode" and Adjusting Resolution, Color Depth and Refresh Rate "" section for details.
Easy Setting
(not provided)
DVI-I to VGA adapter and a VGA cable (not provided).
10
English
Advertisement
Table of Contents
