Disconnecting The Adapter; Using Dual Adapters - Lindy 42728 User Manual

User Manual

Disconnecting the Adapter

If the adapter is unplugged from the computer, the add-on monitor goes blank. All
windows and icons move to the primary screen.
On reconnection of the adapter, the adapter returns to the same mode as it was before
disconnection. However, windows and icons that were previously on the screen will not
be moved back.

Using Dual Adapters

Up to two adapters can be simultaneously attached to one computer. To use two
adapters:
1. Install the driver as described above and connect the first adapter to your computer.
2. Then connect the second adapter to your computer. The system will automatically
complete the installation.
While two adapters are connected to a computer, in most cases both adapters support
extended and mirror modes. The only exception is on Windows Vista XDDM mode as
described below.
Limitation for dual adapters on Windows Vista in XDDM mode: In this mode one
extended screen and one mirrored screen is supported. Only the first connected adapter
can be configured to use extended mode; the second adapter is forced to use mirror
mode. When you bring out the Windows display settings dialog box, you will find that only
one ...DisplayLink Graphics Adapter (representing your first attached adapter) is
configurable.
21
English