Table of Contents
Related Manuals for Lindy 42856
Summary of Contents for Lindy 42856
- Page 1 USB to Serial Converter User Manual Benutzerhandbuch Manuel Utilisateur Manuale d’uso © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (NOV 2002) LINDY No. 42856 & 42857 www.LINDY.com English Deutsch Français Italiano...
- Page 2 CONTENT For detailed description of the DRIVER INSTALLATION with screen shots included please refer to the ENGLISH manual. The description in the german, french and italian manuals are as short guide only. All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.
-
Page 3: Product Features
English Manual 1. Overview Congratulations on your purchase of the USB-Serial adapter. This device provides a simple and easy way to connect Universal Serial Bus (USB) and Serial port interface. With the advantage of USB port, users have the capability to utilize the peripheral with serial port interface in an easy to use environment such as plug and play &... - Page 4 English Manual 5.1.3 Select “Search for the best driver for your device (Recommended)”, and then click “Next” to continue. 5.1.4 Insert the USB-Serial adapter software driver into the CD-ROM drive and select Specify a location and type the “D:\Driver\USB-SERIAL ADAPTER\Windows” in the dialogue (D: represents CD-ROM)
- Page 5 English Manual 5.1.5 Windows® will detect the driver (SERWPL.INF) and shows the Prolific USB-to-Serial Comm Port. Click “Next” to continue installation. 5.1.6 Click Next to continue and let Windows disk. 5.1.7 When Windows 5.1.8 After install the driver, you have to check the “Control Panel”-“System”- “Device Manager”...
-
Page 6: Driver Un-Installation
English Manual Windows 98 Driver Un-installation ® If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.2.1 Unplug the USB-Serial adapter from your PC. 5.2.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.2.3 Click “Ok”... -
Page 7: Windows ® Me Driver Installation
English Manual Windows ME Driver Installation ® Follow the steps below to install Windows 5.3.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.3.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and Plug in the USB-Serial adapter into the USB port;... - Page 8 English Manual 5.3.4 When Windows 5.3.5 After install the driver, you have to check the “Control Panel”-“System”- “Device Manager” to make sure the driver has already installed, you can see a USB to Serial Port (COM3) under the Ports (COM & LPT) and a Prolific USB-to-serial Com Port under the Universal Serial Bus Controller.
-
Page 9: Windows ® Me Driver Un-Installation
English Manual Windows ME Driver Un-Installation ® If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.4.1 Unplug the USB-Serial adapter from your PC. 5.4.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.4.3 Click “Ok”... -
Page 10: Windows ® 2000 Driver Installation
English Manual Windows 2000 Driver Installation ® Follow the steps below to install Windows 5.5.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.5.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and Plug in the USB-Serial adapter into the USB port, Windows will run the Found New Hardware Wizard to assist you in setting up the new device. - Page 11 English Manual 5.5.5 Windows continue. 5.5.6 Click “Finish” to finish the step. 5.5.7 After the step, you have to check the “Control Panel”-“System”- “hardware”-“Device Manager” and you can see the (Prolific USB to Serial Comm Port) under the Ports (Com & LPT) ®...
-
Page 12: Windows ® 2000 Driver Un-Installation
English Manual Windows ® 2000 Driver Un-Installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.6.1 Unplug the USB-Serial adapter from your PC. 5.6.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.6.3 Click “Ok”... -
Page 13: Windows ® Xp Driver Installation
English Manual Windows XP Driver Installation ® Follow the steps below to install Windows 5.7.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.7.2 Insert the driver of USB-Serial adapter into CD-ROM drive and plug in the USB-Serial adapter into the USB port, the “Found New Hardware Wizard”... - Page 14 English Manual 5.7.6 After install the driver, you can see a new Prolific USB-to-Serial Comm Port (COM3) under the Ports (COM&LPT).
-
Page 15: Windows ® Xp Driver Un-Installation
English Manual Windows XP Driver Un-Installation ® If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.8.1 Unplug the USB-Serial adapter from your PC. 5.8.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM, and then reboot the PC. 5.8.3 Click “OK”... -
Page 16: Mac Driver Installation
English Manual MAC Driver Installation Follow the steps below to install driver of USB-Serial adapter: 5.9.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.9.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and copy the “D:\Driver\USB-SERIAL ADAPTER\MAC\SETUP.SIT”... - Page 17 English Manual 5.10 MAC Driver Un-Installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.10.1 Unplug the USB-Serial adapter from your MAC machine. 5.10.2 Remove the “PL-2303G” into the trash and then reboot your MAC machine.
-
Page 18: Troubleshooting
English Manual 7 Trouble Shooting If you can successful install the driver but cannot use the USB-Serial Adapter with connect the other device: Go to the Control Panel-System-Device Manager and check the COM (COM&LPT), if you cannot see this item: Please check the BIOS setting →... -
Page 19: Installation Der Treiber
Schließen Sie den USB Seriell Adapter am USB-Port an. Windows wird ein unbekanntes Gerät identifizieren und startet automatisch den Hardwareassistenten um Ihnen bei der Einrichtung des neuen Geräts zu helfen. Legen Sie die LINDY Treiber-CD in das CD-Laufwerk ein und klicken Sie auf Weiter um fortzufahren Für Nutzer von WINDOWS 98: a) Wählen Sie Nach dem besten Treiber für das Gerät suchen und klicken Sie auf Weiter. - Page 20 3) Klicken Sie auf OK um fortzufahren. 4) Nachdem der Treiber entfernt wurde, muss der Rechner neu gestartet werden. LINDY-Elektronik GmbH behält sich das Recht vor, Informationen dieses Handbuchs an den Stand der Technik anzupassen. LINDY-Elektronik GmbH übernimmt keinerlei Gewähr hinsichtlich der Vollständigkeit und Richtigkeit der hier gemachten Angaben.
-
Page 21: Configuration Minimale
ISDN, etc.. se connectent sur cet adaptateur. Livraison Vous trouverez en plus de l‘adaptateur USB Série LINDY un câble USB et un CD de pilotes. Configuration minimale IBM® PC 486DX4-100 MHz CPU ou plus ... - Page 22 Manuale in Italiano Pour les utilisateurs de WINDOWS ME: e) Validez par Rechercher le meilleur pilote pour ce périphérique et cliquez sur Suivant. f) Recherchez le répertoire d‘accès à partir du lecteur CD et cliquez sur Suivant. g) Vérifiez le chemin que Windows affiche. Cliquez sur Suivant. Windows va trouver le pilote (serwpl.inf) et affichera Prolific USB-to-Serial Comm Port.
-
Page 23: Contenuto Della Confezione
Manuale in Italiano Introduzione Congratulazioni per aver acquistato l’adattatore USB-Seriale Lindy. Questo prodotto permette di connettere semplicemente delle periferiche con interfacce seriali attraverso la porta USB.. Grazie alla connessione USB potrete utilizzare queste periferiche con il vantaggio di un funzionamento completamente Plug&Play oltre alla possibilità di collegamento a caldo della periferica. -
Page 24: Installazione Dei Driver
Manuale in Italiano Installazione dei Driver ® Windows Seguite la seguente procedura per installare l’adattatore: o Accendete il PC e controllate che le porte USB siano abilitate e funzionanti o Collegate l’adattatore USB-Seriale ad una porta USB e avviate l’installazione guidata di nuovo Hardware per assistervi nella configurazione. -
Page 25: Windows Xp
Manuale in Italiano Windows 2000 ® Seguite la seguente procedura per installare l’adattatore: o Accendete il PC e controllate che le porte USB siano abilitate e funzionanti o Inserite il CD-ROM dei driver e collegate l’adattatore alla porta USB del PC o Quando appare la finestra di installazione guidata selezionate l’opzione per la ricerca automatica del miglior driver (quella raccomandata) e poi fate click su “Avanti”... -
Page 26: Risoluzione Dei Problemi
Manuale in Italiano Seguite la seguente procedura per installare l’adattatore: o Accendete il vostro MAC e controllate che le porte USB siano abilitate e funzionanti o Inserite il CD dei driver e copiate il file “D:\Driver\USB-SERIAL ADAPTER\MAC\SETUP.SIT” (D: rappresenta la lettera associate al lettore di CD- ROM) sul Desktop. - Page 27 (d) Consult the supplier or an experienced radio / TV technician for help. © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (NOV 2002) FCC Compliance Statement (United States) This equipment has been tested and found to comply with part 15 of FCC rules.