Display Configuration - Lindy 43175 Installation Manual

Windows 7
1. Insert the provided CD into your disc drive.
2. Click Run Setup.exe to start the installation.
NOTE:
If the AutoPlay does not appear automatically, locate and double-click
on the Setup.exe file in the driver folder to launch the setup.
Enter the administrator password if prompted and then click Yes to
start the installation if a User Account Control dialog box appears.
3. Click I Accept for the next step.

Display Configuration

NOTE: The following screenshots in this section are from the Windows 7
operating system. It may not match your operating system but the
definitions of buttons, tabs and menus are the same.
Utility settings
The supplied utility allows configuring the display mode, screen rotation,
screen resolution, and physical arrangement of your monitors.
1. Click the utility icon in the Windows System Tray.
NOTE: If you cannot find the icon
the arrow icon to bring up icon list to find it
2. Select a preferred option, and then click it using your mouse.
E n g l i s h
in Windows System Tray, click
4. Be patient with the installation procedure.
5. When the operating system detects the adapter, the reminder
message will appear in the system tray.
Verifying the installation:
To verify the driver of the adapter, follow the step below.
1. Following the path to open the device manager:
Control Panel\ System and Security\ Systems\ Device manager
2. You will find DisplayLink Adapter device listed as below.
NOTE:
If you cannot find the driver in the list, the driver may not be properly
installed. Please delete the item, unplug the adapter and repeat the
installation step s.
Description of the settings:
Options Description
Screen Click to select an available
Resolution resolution. Note that this function
is invalid in mirror mode, as the
resolution is defined as the
resolution of the primary monitor
Screen Rotation Rotate the screen according to
the desired orientation
Extend Use the monitor connected to the
adapter as an Extended Desktop
Extend to The cursor can extend to desired
screen via left/right/above/below
way moving
Set as Main Set the monitor which connects
Monitor with the adapter to be the main
screen
Mirror Duplicate the primary monitor to
the monitor which connects with
the adapter
Off Turn off the monitor
Fit to TV Adjust the size of Windows
Desktop on the TV
NOTE: This function works only
when one add-on monitor is
connected. Besides, this option
will also only work in extended
mode. The add-on monitor will
change to the extended mode if
selecting this option while in
mirror mode.