Standby And Hibernate, Shut Down And Restart - Lindy 42728 User Manual

User Manual
4. To change the refresh rate, click Advanced... and then click Monitor.
5. Select a refresh rate from the Screen refresh rate drop-down list and then click
Apply.
6. Click OK to close the settings screen.

Standby and Hibernate, Shut Down and Restart

When the adapter is connected to a computer and an external monitor, if the computer
goes into standby or hibernate mode, the external monitor display goes blank.
When the computer returns to an active state, the external monitor display keeps the
same settings it had before the computer went into standby or hibernate mode. However,
if the add-on monitor was set for extended mode, windows that were previously on the
external monitor will not move back to that secondary monitor. Also, if the add-on monitor
is in extended mode and the computer requires a login after standby or hibernate mode,
the login screen appears on the primary computer monitor, not the external monitor.
If the computer is shut down, restarted and logged in, again the add-on monitor returns to
the same mode as it was before shutdown.
20
English