Bushnell ImageView 118328 Instruction Manual page 6

The first item in the Setup menu is "Format". Press the OK/SNAP (E) button, then press the DOWN arrow key
to select "Execute". Note: formatting the card will erase all files-make sure you have backed up any files you
wanted to keep. Press OK/SNAP again to format the card (the display reads "One Moment"). Press the LEFT key
twice to select and then exit the Capture menu.
Setting the Menu Language Preference (Optional-only necessary for non-English speakers)
To set the menu language (default=English), press the MENU button (D) to display the "Capture" menu, then
press the RIGHT arrow key to select the "Setup" menu. Press the DOWN arrow key twice to select "Language",
then press the OK/SNAP button. Select your preferred language using the UP or DOWN keys, then press OK/
SNAP to set it. Press the LEFT key twice to exit the Setup and Capture menus.
Setting the Date and Time (Optional-only necessary if you want to imprint date/time on photos)
The Date/Time Stamp feature is turned off by default. If you want to use it, first set the date and time by
pressing MENU. Press the Right arrow key to select the Setup menu, then press the UP arrow key to select
"Date Input", and press OK/SNAP. Select "set", press OK, and use the LEFT/RIGHT arrow keys to select a field
(format, day, month, year, hour, etc.) and use the UP/DOWN arrow keys to change the setting. When finished,
press OK/SNAP, then press the LEFT arrow key to select the Capture menu. "Time Stamp" should already be
highlighted. Press OK/SNAP, select the option you prefer, and press OK/SNAP again. Press the LEFT arrow key
to exit the menu. Reset the date/time after you replace batteries.
6