Bushnell ImageView 118328 Instruction Manual page 12

CAPTURE MENU
Parameter Settings
(Bold=Default)
iSO Auto, 100, 200, 400,
800
Color Standard, Vivid,
Sepia, Monochrome
High, Normal, Low
Saturation
Hard, Normal, Soft
Sharpness
On, Off
Preview
Off, Date Only,
time Stamp
Date&time
On, Off
Burst
On, Off
Noise Reduce
12
Function/Description
Sets the sensor's sensitivity to light. "Auto" will automatically select lower iSO in bright light,
higher iSO in lower light. Lower iSO settings=better image quality
Standard=normal colors, Vivid=extra rich colors, Sepia="antique" photo effect,
Monochrome=black & white photo effect.
Selects amount of color saturation. High=deeper colors, Low=softer colors.
Sets the amount of sharpening applied by the internal processor. You may want to select "Soft" if
you prefer to add sharpening later using photo software on your PC.
"On"=captured image is briefly shown on display immediately after snapping photo.
Select "Date Only" to imprint date on photos/videos. Select "Date & time" to imprint both date
and time. Be sure correct date/time has been set, using "Date input" in the Setup Menu. Select
Off (default) if you don't want date or time imprinted on images.
When set to "On", a rapid series of 3 photos will be taken with each press of the SNAP button.
"On"=software processing is automatically applied to help reduce appearance of digital noise
(grain) in photos taken under low light and other difficult conditions.